Denali 605Pro | Stainless Smart Propane Gas Grill Combo

We'll show you how to connect all the wires for the Denali Series.

Experience the best of life with the quality, capability, and versatility of the Monument Denali Series.

Click here.

The maximum temperature of the grill may vary slightly depending on the ambient temperature and the method of use. We provide reference values for the maximum temperature: approximately 680°F for the 4B grill and approximately 720°F for the 6B grill.

The lowest power of Denali side burner is at 5500 BTU.

Our Denali currently does not have a night lighting system, and we have tricolor knob lights to enhance your barbecue experience.

Four #5 batteries provide 80 hours of display use when only the display is powered.

The Denali doesn't need to be charged, but you can choose to power the display with an external battery pack.

In extreme (cold) weather conditions, it is normal for batteries to have a lower-than-expected life span. In order to avoid this, we recommend using an external battery pack and connecting it to the USB port inside of your grill cabinet. It is also recommended to bring the battery pack inside after every use.

Yes. The Bluetooth connect with the grill reliably for up to 65 feet outside.

You can check the temperature via Bluetooth app or Smart Temperature Display.

When replacing the burner make sure that the gas tank valve is closed and that the inside of the furnace is completely cooled. You can operate as follows:
1. press and hold the burner circlip and push it outward;
2. Remove the burner;
3. after replacing the burner with a new one, install the circlip.

Before turning on the gas to "ON," check the supply hose. If there are cuts, abrasions, or signs of wear, it must be replaced before use. If there is a gas smell, do not use the grill.

1. Fully open the side burner lid.
2. Push and turn the side burner knob to the max position. Simultaneously, press and hold the electronic ignition button for 3-5 seconds to ignite the burner.
3. If the side burner does not light after 5 seconds, turn the knob to OFF. Close the LP gas cylinder and wait 5 minutes for the gas to clear. Then open the lid and repeat step 2.
4. If the burner still does not ignite, refer to the section on lighting with matches.

Ensuring proper preheating of the grill is crucial for achieving the desired high temperature. Begin by lighting the grill following the instructions in your owner's manual. Then, turn up the burners, cover the grill with the lid, and wait approximately 15 minutes. After this time, the grill should reach a temperature between 500 and 550 degrees Fahrenheit. Properly preheating your grill is also essential for preventing food from sticking to the cooking grates.

It is the manual lighting stick, our grill is equipped with a manual ignition device, which you can use to light the grill when there is a problem with the electronic ignition device.

The shelf is designed to hold plates of food to be cooked, spices, sauces, beverages, etc. It should not be used to hold excessive weight. The Denali grill shelves can hold up to 45lbs and the rest of the grill shelves can hold up to 20lbs.

Our grease tray has been treated with antirust treatment. In order to prolong the service life of the grease tray, we recommend that you clean the grease tray after each cooking.

Never lean over the grill cooking area while lighting your gas grill. Keep your face and body a safe distance (at least 18 inches) from the cooking grid surface when lighting your grill by match.

We suggest you wash your cooking grids in a mild soap
and warm water solution. You can use a wash cloth or
soft brush to clean your cooking grids.

Once your grill has cooled completely, use a plastic scraper to scrape the surface grease off the manifold.