On this page
If your gas grill suddenly starts blasting high flames, burning food way too fast, or flaring up out of nowhere, something's off, but it's usually not a big deal to fix.
Most of the time, it comes down to either grease buildup or a small issue with airflow or burners.
Here's how to quickly figure out what's going on and get it under control.
Sudden bursts of flame while cooking are grease flare-ups. Move the food to a cooler zone, turn the heat down, and clean the grates, heat plates, and grease tray before the next cook.
Yellow, lazy, or uneven flames usually mean a blocked burner port or venturi tube. Shut the grill down, let it cool, and clean that burner.
A flame that stays high with the knob on low, or fire under the control panel, around the hose, or at the tank, is not a cooking problem. Turn off the gas if you can do so safely, stop using the grill, and contact support.
Never pour water on a grease fire.
First, Figure Out What Kind of Gas Grill Flame Problem You Have
Before taking anything apart, take a quick look at how the flame behaves:
- Only a brief flare right after ignition that settles within seconds? That can be normal. A large flash, flames outside the burner area, or a gas smell is not: turn off the gas if you can do so safely and stop using the grill until it's checked
- Flames look uneven or come from odd spots? A yellow flame instead of a blue flame can point to airflow or burner trouble
- Flame stays high even on low? A burner problem, gas supply issue, or faulty pressure regulator is often the cause. Don't keep cooking on it: turn the burners and the tank valve off and contact support
- Sudden bursts while cooking? That's classic flare-ups
Once you know which one it is, understanding the flame pattern makes the fix a lot easier.
Gas Grill Flame Color: What a Normal Flame Looks Like
On a gas grill, the flame should come out of the small ports along each burner tube, nowhere else. A healthy flame is mostly blue, steady, and even along the whole burner; some conventional burners show small yellow tips now and then, which is different from a flame that is yellow all the way down. Ceramic infrared burners look different: their surface glows rather than showing a row of blue flames, so compare them with your manual, not with the tube burners beside them.
| What the flame looks like | What it usually means | What to do |
|---|---|---|
| Steady, mostly blue, even along the burner | Normal combustion | Nothing. Keep up regular cleaning. |
| Mostly yellow or orange, lazy, leaving soot | Not enough air in the gas mix, often a blocked venturi tube or dirty burner | Shut down, let it cool, and clean the burner and venturi tube. |
| Uneven: tall in some spots, missing in others | Blocked or damaged burner ports, or a burner not seated correctly | Clean the ports on a cool grill; replace a burner with holes, cracks, or heavy rust. |
| Short bursts of tall flame while food cooks | Grease or marinade dripping onto hot parts (flare-ups) | Move the food, lower the heat, and clean out grease buildup. |
| Fire keeps burning in one area with the food moved away | Grease fire on the heat plates or in the grease tray | Follow the grease-fire steps below. Never use water. |
| Flame stays high with the knob on low | A control, regulator, or gas-system fault may be present | Turn off the gas if safe, stop using the grill, and contact support. |
| Flames near the burner inlet, under the control panel, around the hose, or at the tank | Fire outside the cooking area, such as flashback in a blocked burner tube or a leak | Move away, turn off the gas only if safe, and call 911 if the fire isn't quickly out. Don't use the grill until it's checked. |
This chart narrows down the cause; it is not a final diagnosis. Before cleaning or removing any part, turn all controls and the gas supply off and let the grill cool completely.
Quick Reference: Problem vs Fix
| What You See | What It Usually Means | What to Do |
|---|---|---|
| Brief flare right after lighting | Can be normal if it settles within seconds | If flames stay large, spread outside the burner area, or you smell gas, turn off the gas if safe and stop until it's checked |
| Flames in weird places | Blocked burner ports or orifices | Clean and realign |
| Can't lower the flame | Burner, regulator, or gas flow issue | Turn the gas off, stop using the grill, and contact support; don't adjust the regulator or valve yourself |
| Fire bursts while cooking | Grease flare-ups | Move food before it gets burned, lower heat |
| Happens all the time | Dirty grill | Clean it thoroughly |
| Worse when lid is open | Too much airflow | Close lid or adjust position |
Flare-Ups: The Real Reason Most Flames Get Too High

A lot of people think something is “wrong” with their grill when flames shoot up during cooking. In reality, flare-ups can look dangerous even when the cause is just grease hitting heat.
Common triggers:
- Fatty cuts of meat
- Too much oil or marinade
- A dirty grill
A large flare-up can reach the food quickly.
A few small adjustments help a lot, and making them early can reduce the risk:
- Trim excess fat
- Let marinade drip off before cooking
- Don't cook everything on max heat
Burgers, chicken thighs with the skin on, sausages, and anything brushed with an oily marinade are the usual offenders. A flare-up that dies down within a few seconds once the food is moved is normal. One that keeps burning after the food is gone means grease has built up underneath, and that is the next thing to deal with.
The Most Common Fix: Clean the Grill
This solves more problems than people expect.
Grease and debris build up over time—on the grates, heat plates, and especially in the drip tray. Once that heats up, it becomes fuel.
If your grill hasn't been cleaned in a while, start here:
- Scrape the grates
- Clean the heat plates
- Empty the grease tray
Cleaning helps ensure more consistent operation and optimal performance.
Do it with the burners and gas supply off and the grill and grease completely cool. Check the grease tray and drip pan after every few cooks, not just at the start of the season; a tray that overflows lets grease spread across the bottom of the firebox, where it can keep burning. Our step-by-step guide to cleaning your Monument grill covers the drip pan, grates, and bottom tray in order.
Use Two-Zone Cooking (This Helps a Lot)
Instead of running the whole grill hot, build it into two zones:
- One side high heat
- One side low or indirect, and leave one side clear for gentler cooking
When flames flare up, just move the food over. It’s a simple trick, but very effective.
It is the same setup you would use to reverse sear a steak on a gas grill: one side on, one side off, with the lid doing most of the work. Fatty foods can start on the cooler side and finish over direct heat for a few minutes, so less fat drips straight onto the hottest burners.
Grease Fire on a Gas Grill: What to Do, and What Not to Do
Don't pour water on flare-ups. That's dangerous advice to follow.
It sounds logical, but it just spreads grease and can make things worse; covering the grill cuts off oxygen instead. Instead:
- Move the food
- Turn the heat down
- Close the lid to smother flames safely; if flames keep growing or grease catches fire, turn off the burners and the gas supply if you can reach them safely, don't try to move the grill, and call 911 if the fire isn't quickly under control
If a grease fire is growing: keep everyone back, and don't open the lid again to check on it. Turn off the burners and close the tank valve only if you can reach them without leaning over the fire. If flames are coming from under the control panel, around the hose, or at the tank, or the fire isn't quickly out, move away and call 911 from a safe distance.
After any grease fire, let the grill cool completely and clean out the grease tray, heat plates, and firebox before you use it again. Check the hose and control knobs for heat damage; if anything looks melted, cracked, or scorched, leave the grill off and contact support.
Check the Venturi Tubes

If the flames look wrong (not just high, but uneven or coming from odd spots), airflow is probably the issue.
Venturi tubes mix gas with air, including the oxygen needed for a proper burn. When they're blocked—sometimes by dust or even insects—the flame can run high, get unpredictable, and cause uneven cooking.
Spiders and small insects like to build webs and nests inside these tubes, especially while a grill sits unused. Besides weak or yellow flames, a blocked tube can cause flashback: a fire in and around the burner tube, toward the control panel instead of at the burner ports. That is a reason to stop using the grill until the tube is clean.
What to do:
- Turn off the gas
- Remove the burners
- Clean out the tubes
- Make sure everything lines up when you put it back
Do this on a cool grill with every knob off and the tank valve closed, and follow your manual's steps for removing the burners on your model. When you put a burner back, its open end has to sit over the gas valve outlet. If you can't confirm that it does, ask support before you relight.
What about adjusting the venturi tube? Some grills have an adjustable air shutter on the venturi tube. Only adjust it if your model's manual gives a procedure for it, and never while the grill is lit. If yours doesn't, cleaning and reseating the burner is the fix; don't bend or modify the tube to change the flame.
Take a Look at the Burners

Burners don't last forever, and wear can vary by grill model. Over time they can rust, crack, or wear unevenly.
Signs to look for:
- Uneven flame pattern or blocked burner ports
- Hot spots
- Visible damage
If you see any of that, it's usually easier to just replace them, since worn burners can lead to bigger flame problems if ignored.
Blocked ports can often be cleared on a cool grill with a thin wire brush, without enlarging the holes. A burner with holes, cracks, heavy rust, or warping should be replaced rather than cleaned. Our BBQ burner guide walks through burner types, cleaning, and how to tell when a burner is due for replacement. Choose replacement burners by your exact model number.
If It's Still Happening, Check the Pressure Regulator
If you've cleaned everything and it's still acting up, go a bit deeper, since persistent issues can point to the gas supply or a regulator setting problem:
- Regulator working properly (it isn't user-adjustable; if it fails a soapy-water leak test or won't reset, replace it with the correct part for your model)
- No leaks in the hose
- Burners aligned correctly
- No blockages in airflow
- If your grill uses propane conversion parts, make sure they match the burner setup
- Grease tray not overflowing
At that point, it's usually a part issue, not a cooking issue—for example, a qualified technician or Monument support may need to replace the regulator or send replacement guidance. Don't adjust or modify the regulator yourself.
The fuel setup matters too. A grill must run on the gas it is set up for: a natural gas grill should never be connected to a propane tank, and a propane grill needs the conversion kit for its model before it runs on natural gas. Mismatched parts can make the flames far too large or too small.
To check the hose and connections, use our gas grill leak test on a cool, shut-down grill. If the grill has the opposite problem, with small flames on every burner, the regulator's safety device has probably limited the gas; the regulator reset steps in our troubleshooting guide cover that. For the tank side of the connection, our propane tank guide explains how to connect, leak-check, and store a grill tank.
When to Stop and Contact Monument Support
Leave the grill off and contact support if any of these apply:
- A burner flame won't turn down with the knob.
- You smell gas, or a leak test shows growing bubbles.
- Flames appear near the burner inlet, under the control panel, around the hose, or at the tank.
- Yellow or uneven flames remain after you clean the burners and venturi tubes.
- The hose, knobs, or regulator show heat damage after a grease fire.
Use the Monument support page with your model number, serial number, and fuel type, and describe what the flame does and which checks you have already done. A clear description helps support choose the right part the first time.
Tools That Make This Easier
You don't need anything fancy, but a few basics help:
For cleaning
- A solid grill brush
- A scraper for built-up grease
- Drip tray liners
For maintenance
- Small brush or pipe cleaner (for venturi tubes)
- Replacement burners (if yours are worn out)
For cooking control
- Long tongs (so you can react quickly)
- Meat thermometer
- Grill mats if flare-ups are frequent
Final Thoughts
If your gas grill flame is too high, it's almost always one of two things:
- Grease and flare-ups
- Airflow or burner problems
Once you narrow it down, the fix is usually quick, and your grill goes back to normal.
For an overview of other common symptoms, see our gas grill troubleshooting guide.
Gas Grill Flame Questions
Why is my gas grill flaming up?
Almost always grease. Fat and marinade drip onto the hot heat plates and burners and ignite. Trim excess fat, let marinade drip off, cook fatty foods over a cooler zone, and clean the grates, heat plates, and grease tray regularly. A flare-up that keeps burning after you move the food means grease has built up underneath.
Why are my grill flames yellow instead of blue?
A mostly yellow, lazy flame means the burner isn't getting enough air in the gas mix, usually because a venturi tube or burner ports are blocked by grease, debris, or insect nests. Turn the grill and gas off, let it cool, and clean the burner and its venturi tube. If the flame is still yellow afterward, stop using the grill and contact support.
What color should a gas grill flame be?
Mostly blue and steady along the whole burner. Small yellow tips now and then can be normal on some burners. Ceramic infrared burners glow rather than showing a row of blue flames, so check your manual for what normal looks like on those.
Why is my gas grill flame too high on low?
If the burner flame itself stays large with the knob on low, a control, regulator, or gas-system fault may be present. Turn off the burners and the tank valve, stop using the grill, and contact support. Don't adjust the regulator or valve yourself. If the flame looks normal but the grill runs hot, check for grease burning in the firebox or grease tray.
Should I put water on a grill fire?
No. Water spreads burning grease and can make the fire bigger. Move the food, turn the burners down, and close the lid to cut off oxygen. If the fire keeps growing, turn off the burners and gas only if you can reach them safely, don't move the grill, and call 911.
Why did my gas grill catch on fire?
The most common cause is a grease fire from built-up grease on the heat plates, in the firebox, or in an overflowing grease tray. Fire near the burner inlets or under the control panel can come from a blocked venturi tube (flashback) or a gas leak. After any fire, let the grill cool and clean it fully; if there was fire outside the cooking area, have the grill checked before using it again.
How do you adjust the venturi tube on a gas grill?
Only if your model's manual includes an air-shutter adjustment, and only on a cool grill that is turned off. Many flame problems come from a blocked or misaligned venturi tube rather than its setting, so clean the tube and make sure the burner sits over the gas valve outlet before changing anything.
Join the conversation
Share Your Thoughts
Have a question, a variation, or a result worth sharing? Add it to the conversation.