Mesa 200 | Stainless Gas Grill

It is the manual lighting stick, our grill is equipped with a manual ignition device, which you can use to light the grill when there is a problem with the electronic ignition device.

Ensuring proper preheating of the grill is crucial for achieving the desired high temperature. Begin by lighting the grill following the instructions in your owner's manual. Then, turn up the burners, cover the grill with the lid, and wait approximately 15 minutes. After this time, the grill should reach a temperature between 500 and 550 degrees Fahrenheit. Properly preheating your grill is also essential for preventing food from sticking to the cooking grates.

Our grease tray has been treated with antirust treatment. In order to prolong the service life of the grease tray, we recommend that you clean the grease tray after each cooking.

The shelf is designed to hold plates of food to be cooked, spices, sauces, beverages, etc. It should not be used to hold excessive weight. The Denali grill shelves can hold up to 45lbs and the rest of the grill shelves can hold up to 20lbs.

This grill 41847NG and D605 can be converted to natural gas with the purchase of Monument Grills Conversion Kit model 98523 (Sold Separately). You can click here to buy the conversion kit.
The link: https://monumentgrills.com/products/natural-gas-conversion-kit

Our glass window are made of high temperature resistant silicone compounds.

This grill 41847NG and D605 can be converted to natural gas with the purchase of Monument Grills Conversion Kit model 98523 (Sold Separately). You can click here to buy the conversion kit.

The link: https://monumentgrills.com/products/natural-gas-conversion-kit

Our glass window are made of high temperature resistant silicone compounds.

The shelf is designed to hold plates of food to be cooked, spices, sauces, beverages, etc. It should not be used to hold excessive weight. The Denali grill shelves can hold up to 45lbs and the rest of the grill shelves can hold up to 20lbs.

Ensuring proper preheating of the grill is crucial for achieving the desired high temperature. Begin by lighting the grill following the instructions in your owner's manual. Then, turn up the burners, cover the grill with the lid, and wait approximately 15 minutes.

After this time, the grill should reach a temperature between 500 and 550 degrees Fahrenheit. Properly preheating your grill is also essential for preventing food from sticking to the cooking grates.

Yes, we have rain cover for portable gas grill, you need to buy them separately on the website.

The link: https://monumentgrills.com/products/gas-and-charcoal-grill-cover?variant=39833209077823

The link: https://monumentgrills.com/products/gas-and-charcoal-grill-cover?variant=39833181618239

The grill includes a hose to connect to 20lb Propane Tank.

It is the manual lighting stick, our grill is equipped with a manual ignition device, which you can use to light the grill when there is a problem with the electronic ignition device.

Before turning on the gas to "ON," check the supply hose. If there are cuts, abrasions, or signs of wear, it must be replaced before use. If there is a gas smell, do not use the grill.

1. Fully open the side burner lid.
2. Push and turn the side burner knob to the max position. Simultaneously, press and hold the electronic ignition button for 3-5 seconds to ignite the burner.
3. If the side burner does not light after 5 seconds, turn the knob to OFF. Close the LP gas cylinder and wait 5 minutes for the gas to clear. Then open the lid and repeat step 2.
4. If the burner still does not ignite, refer to the section on lighting with matches.

1. Take the manual lighting stick.
2. Insert a match into the lighting stick.
3. Follow steps of the Basic Lighting Procedure.
4. Light the match and extend the lighting stick to cooking grid surface.
5. Turn the desired control knob to the Max position setting to release gas. The burner should light immediately.

The standard QCC1 20 lb propane tank fits our gas grill products.

First, turn the burner control knob to the off position and then close the gas tank valve.